Calibers
GIESSE s.r.l. requires that its machines be equipped with gauges that can be interchanged by the user based on the diameter of the yarn to be produced.
Technical Specifications
| CODE | DIMENSIONS “A” |
| 50001830 | 0,7 |
| 50003860 | 0,8 |
| 50003870 | 1,0 |
| 50003872 | 1,2 |
| 50003880 | 1,5 |
| 50003890 | 1,8 |
| 50003900 | 2,0 |
| 50003920 | 3,0 |
| 50003930 | 4,0 |
| 50003940 | 5,0 |
| 50003950 | 6,0 |
| 50003960 | 8,0 |
| 50003970 | 10,0 |
| 50003980 | 12,0 |
| CHENILLE YARNS COUNT (Nm) | CALIBER DIMENSION (mm.) | CORE YARN COUNT (NE) | EFFECT YARN COUNT (NE) | TPM |
| 1,6 – 2,0 | 2,0 – 3,0 | 12/1 | 12/1 | 580 – 620 |
| 2,5 | 2,0 – 3,0 | 16/1 o 12/1 | 16/1 | 580 – 620 |
| 3 | 1,5 | 16/1 | 16/1 | 600 – 620 |
| 3 | 1 | 16/1 | 16/1 | 600 – 650 |
| 3,6 | 1 | 20/1 o 40/2 | 20/1 | 650 – 680 |
| 4 | 1 | 20/1 | 24/1 o 20/1 | 700 – 720 |
| 4,5 | 1 | 20/1 | 24/1 | 700 – 750 |
| 5 | 1,0 – 0,8 | 24/1 | 24/1 o 26/1 | 750 – 800 |
| 6 | 0,8 | 30/1 | 30/1 | 780 – 820 |
| 7 | 0,8 | 24/1 | 40/1 | 800 – 850 |
| 8 | 0,8 | 30/1 | 40/1 | 850 – 900 |
| 10 | 0,8 | 30/1 | 40/1 (*) | 900 – 950 |
| 12 | 0,7 | 40/1 | 40/1 (*) | 900 – 950 |
| 15 | 0,6 | 40/1 | 40/1 (*) | 950 – 100 |
| Note: (*) only 1 yarn | ||||
| The information and data provided here are presented for information purposes only and without any liability, express or implied. | ||||
Gallery
